Using Radio Text - Pioneer DEH-80PRS Operation Manual

Operating this unit
— iPhone 4
— iPhone 3GS
— iPhone 3G
— iPhone
However, tag information can be stored in this
unit even while other iPod models are used.
The song information (tag) can be saved from
the broadcasting station to your iPod. The
songs will show up in a playlist called "Tagged
playlist" in iTunes the next time you sync your
iPod. Then you can directly buy the songs you
want from the iTunes Store.
! The tagged songs and the song that you
can buy from the iTunes Store may be dif-
ferent. Make sure to confirm the song be-
fore you make the purchase.
Storing the tag information to this unit
1 Tune in to the broadcast station.
2 Press and hold M.C. if TAG is indicated in the dis-
play while desired song is broadcasting.
! While storing the tag data on this unit, TAG
flashes.
Storing the tagged information to your iPod
1 Connect an iPod to the USB cable using an iPod
Dock Connector.
2 Select Tags transfer from the function settings to
transfer tag information from this unit to the iPod.
Refer to Tags transfer (Tags transfer) on page 17.
! If you switch sources during tag transfer, the
transfer will stop. To cancel the transfer, select
Tags transfer from the function settings and
then try transferring the tag information again.

Using radio text

Displaying radio text
You can display the currently received radio text and
the three most recent radio texts.
1 Press and hold down
! You can turn off radio text display by pressing
/DISP, SRC/OFF or BAND/ .
! When no radio text is received, NO TEXT ap-
pears in the display.
2 Turn LEVER left or right to recall the three most
recent radio texts.
3 Press
or to scroll.
Storing and recalling radio text
You can store data from up to six radio text transmis-
sions to the RT Memo 1 to RT Memo 6 keys.
1 Display the radio text you want to store in the
memory.
2 Press
(list).
The preset screen is displayed.
3 Use LEVER to store the selected radio text.
Turn it to change the preset number. Press and
hold down M.C. to store.
4 Use LEVER to select the desired radio text.
Turn it to change the radio text. Press M.C. to se-
lect.
! To return to the ordinary display, press BAND/
or (list).
! The tuner automatically stores the three lat-
est radio text broadcasts received, repla-
cing the oldest text with the newest text.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
! If MW/LW band is selected, only BSM,
Local and Tuning Mode are available.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Regional (regional)
(list) to display radio text.
En
Section
02
11