Installing Three Sli Tm -Ready Graphics Cards - ASROCK Z270 SUPERCARRIER User Manual

TM
2.9.2 Installing Three SLI -Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot,
another graphics card to PCIE2 slot, and
the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect the auxiliary power source to the
PCI Express graphics card. Please make
sure that both power connectors on the
PCI Express graphics card are connected.
Repeat this step on the three graphics
cards.
Step 3
Align and insert the ASRock 3-Way SLI
Bridge Card to the goldfingers on each
graphics card. Make sure the ASRock
3-Way SLI Bridge Card is firmly in place.
ASRock 3-Way SLI Bridge Card
34