Table of Contents
Advertisement
** There are two LEDs on each 5G LAN port. Please refer to the table below for the 5G LAN port LED indications.
ACT/LINK LED
SPEED LED
5G LAN Port
Activity / Link LED
Status
Description
Off
No Link
Blinking
Data Activity
On
Link
*** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Front Speaker
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the
front panel audio header. After restarting your computer, you will find the "Mixer"
tool on your system. Please select "Mixer ToolBox"
multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then
you are allowed to select "Realtek HDA Primary output" to use the Rear Speaker,
Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use
the front panel audio.
**** ACPI wake-up function is not supported on USB3_34 ports.
Speed LED
Status
Orange
Green
Rear Speaker
(No. 9)
(No. 7)
V
--
V
V
V
V
V
V
Description
100Mbps/1Gbps/2.5Gbps
connection
5Gbps connection
Central / Bass
Line In
(No. 6)
(No. 8)
--
--
V
V
, click "Enable playback
Z270 SuperCarrier
--
--
--
V
11
Hide quick links:
Advertisement
Table of Contents
