Sli Tm; Tm , 4-Way Sli Tm And Quad Sli Tm Operation; Guide; Installing Two Sli Tm -Ready Graphics Cards - ASROCK Z270 SUPERCARRIER User Manual

TM
2.9 SLI , 3-Way SLI

Guide

This motherboard supports NVIDIA® SLI
TM
SLI (Scalable Link Interface) technology that allows you to install up to four
identical PCI Express x16 graphics cards.
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA® SLI
3. Make sure that your power supply unit (PSU) can provide at least the minimum
2.9.1 Installing Two SLI
32
TM
, 4-Way SLI
fied.
Download the drivers from the NVIDIA® website: www.nvidia.com
power your system requires. It is recommended to use a NVIDIA® certified PSU.
Please refer to the NVIDIA® website for details.
TM
-Ready Graphics Cards
TM
and Quad SLI
TM TM
, 3-way SLI , 4-way SLI
TM -ready graphics cards that are NVIDIA® certi-
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
Operation
TM
and Quad
TM technology.