Table of Contents
Advertisement
3-2. Setting Menu Functions
●
Color Adjustment
The color mode setting status can be adjusted according to personal preference.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after power to the monitor has been turned on before adjusting the monitor.
• The same image may be observed in different colors on multiple monitors due to monitor-specific
characteristics. Make fine color adjustments visually when matching colors across multiple monitors.
Function
Color Mode
Brightness
14
Chapter 3 Advanced Adjustment/Setting
Color Mode
(Functions that can be adjusted
differ depending on the color
mode.)
√: Adjustable -: Not adjustable
User1
sRGB Paper DICOM
User2
√
√
√
√
√
√
Description
√
Select the desired mode according to the monitor
application.
The color setting status can also be adjusted
according to personal preference. Select the
mode for adjustment and perform adjustment
using the relevant functions.
Setting Range: User1, User2, sRGB, Paper, DICOM
Note
• For details on the adjustment status of each
mode, see
"2-3. Switching Display Modes
(Color Modes)" (page
-
The screen brightness is adjusted by changing
the brightness of the backlight (light source from
the LCD back panel).
Setting Range: 0 to 100
Note
• If the image is too dark even when the
brightness is set to 100, adjust the contrast.
10).
Advertisement
Table of Contents
