Using The Appliance - Melissa 16230026 User Manual

• Please note that the centrifuge
bowl may still rotate for a while
after you switch the appliance off.
• Be careful not to touch the sharp
blades of the centrifuge bowl
during use and cleaning!
Cord and plug
• Do not let the cord hang out over
the edge of the work surface.
• Check that it is not possible to
pull or trip over the cord or any
extension cord.
• Keep the cord and appliance away
from heat sources, hot objects and
naked flames.
• Remove the plug from the socket
before removing the lid from
the appliance, before cleaning,
or when the appliance is not in
use. Avoid pulling the cord when
removing the plug from the socket.
Instead, hold the plug.
• Ensure that the cord is fully
extended.
• The cord must not be twisted or
wound around the appliance.
• Check regularly that neither cord
nor plug is damaged and do not
use if they are, or if the appliance
has been dropped or damaged in
any other way.
• If either the appliance, cord or
plug has been damaged, have
the appliance inspected and
if necessary repaired by an
authorised repairer. Never try to
repair the appliance yourself.
Please contact the store where you
bought the appliance for repairs
under the guarantee. Unauthorised
repairs or modifications to the
appliance will invalidate the
guarantee.
KEY TO THE MAIN COMPONENTS
OF THE APPLIANCE
1. Tamper
2. Lid
3. Centrifuge bowl
4. Base
5. Locking
mechanism
6. Fruit pulp holder
7. Motor section with
on/off button
8. Juicer jug
PRIOR TO FIRST USE
• Remove all packaging and
transport materials from the inside
and outside of the appliance.
• Check that the appliance has no
visible damage and that no parts
are missing.
• Before using for the first time (or
after prolonged storage without
use), wash any parts that will
come into contact with food. See
"Cleaning".
USING THE
APPLIANCE
Assembly before use:
1. Place the motor
unit (7) on a flat
surface, e.g. a
kitchen counter,
and make sure it is standing firmly.
2. Place the base (4) on the motor
section so that the spout fits in
the slot on the side of the motor
section.
3. Push the fruit pulp holder (6) up
under the drain edge on the base
so that it fits the foot of the motor
unit tightly.
4. Carefully lock the centrifuge bowl
(3) onto the base.
5. Be careful not to touch the
sharp parts in the bottom of the
centrifuge bowl.
23
8