Connecting Power - Clarity Bay Cat X User Manual

2.4 Connecting Power

Bay Cat X accepts 110-120 VAC and 200-240 VAC with no manual switching.
Plug the power cord into the receptacle on the rear of the
Bay Cat X. Plug the other end into a good source of AC
power.
When ready, turn on the power switch.
12
Normal operation
It is normal to leave the power connected and the power
switch on all the time and turn the backlight on and off as
desired.
For power receptacle dimensions, see "Connector Loca-
tions and Diagrams" on page 114.
Power receptacle and power switch location