Table of Contents
Advertisement
Charging with Desktop Holder
When using supplied Desktop Holder SO24
and AC Adapter 05 (optional) for charging, do
the following procedures.
Be sure to attach the supplied attachment
･
(Attachment 34A or Attachment 34B) to the
desktop holder when charging (P.36). The
terminal cannot be charged on the desktop
holder without attachment.
Notification
LED
Desktop holder
Charging jack
microUSB plug
Insert a microUSB plug of the AC
1
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing up ( ).
Unfold the power plug of the AC
2
adapter and insert it into an outlet.
AC adapter
Install the terminal to the desktop
3
holder and move it left or right
until it clicks.
When the terminal and the desktop
･
holder are correctly connected, the
notification LED of the terminal turns
on (P.46).
When charging is complete,
4
holding the desktop holder, lift the
terminal up to remove.
Remove the power plug of the AC
5
adapter from the power outlet.
Remove the microUSB plug of the
6
AC adapter from the desktop
holder.
Before Using the Terminal
35
Advertisement
Table of Contents
