Post-update display
■
appears on the status bar. Drag the
status bar downwards
notification, a message indicating that
software update is complete appears.
Reserving software update
You can preset time to update the software if
you want to specify another time for
installing the update file.
Display the Software update
1
notice screen
u
Set a time
[Set].
2
When the reserved time is reached
■
When the reserved time is reached, a
message for rewriting start appears, then
rewriting starts automatically in
approximately 10 seconds.
❖ Information
While updating the software, all key operations
・
become disabled. Also, updating cannot be
canceled.
If software update could not be started at the preset
・
time, the software update will be performed at the
same time the following day.
While upgrading Android software, software update
・
is not executed even when the set time arrives.
When an alarm etc. is set at the same time as the
・
reserved time, priority will be given to the software
update.
u
Tap the
u
[Set Time].
If SO-02G is turned OFF at the reserved time, the
・
software update starts at the same time as the
reserved time after the terminal is turned ON.
If
(Software update was suspended Please check
・
the remaining internal storage capacity and retry.)
appears on the status bar during software update,
make sure that sufficient memory remains on the
phone memory and retry to update.
If
(Software update was suspended Please check
・
the status of the handset and retry.) appears on the
status bar during software update, make sure that
the terminal is not in the following states and retry to
update.
- No signal
- Interfered by some function
209
Appendix/Index