Perform a target operation.
2
"OK" : Return to the Home screen.
・
Updating starts when the preset time
reaches.
"Set Time" : Reserved update
・
"Reserving software update" (P.209)
"Start update" : Update immediately
・
"Updating software immediately"
(P.208)
❖ Information
If the software is not updated when the update
・
notification is received,
to notify.
If software update at the preset time could not be
・
performed, the software update will be performed at
the same time the following day.
Software cannot be updated automatically when the
・
Auto-update setting is set to "Manual Update" or
while updating software by Now update.
→
→
appears on the status bar
Updating software
immediately
Software update starts immediately.
There are 2 ways to activate software update:
・
activating from Software update notice
screen and activating from the menu.
From the Home screen,
1
u
[Settings]
[Software Update].
[Start the software update]
2
For activating from Software update
・
notice screen, display the Software
update notice screen
After a message for rewriting start
3
appears, rewriting starts
automatically in approximately 10
seconds.
Tap [OK] to start rewriting
・
automatically.
While updating the software, all key
・
operations become disabled. Also,
updating cannot be canceled.
When the software update is complete,
・
the terminal restarts and the Home
screen is displayed.
❖ Information
If software update is not needed, "No update is
・
needed. " is displayed.
u
u
[About phone]
u
[Yes].
u
[Start update].
Appendix/Index
208