Playing A Disc; Playing A Usb Mass Storage Device - Philips MCD395/12 Quick Start Manual

Playing a disc

1
OPEN•CLOSE 0
Press
button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press 9.
Programming and tuning to radio stations
1
Press SOURCE (TUNER
2
Press for more than two seconds to program all available stations in
PROG/ANGLE
order of waveband.
3
Press until the desired preset station is displayed.
PRESETí/ë
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.

Playing a USB mass storage device

With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1)
work with this Hi-Fi system).
1
Insert the USB device's USB plug into the socket
2
Press SOURCE (or USB on the remote control) once or more to select USB.
3
Play the USB's audio files as you do with the albums/tracks on a CD.
to open the disc tray and load in a disc, then press the same
on the remote) to select tuner source.
memory cards (requires an additional card reader to
,
on the front panel of the main set.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
http://www.philips.com
MCD395_QSG_12_V2.0