Philips HTS9800W/37B User Manual page 53

Problem
No HDMI audio output.
No HDMI video output.
There is interference on your
HTS9800W rear speakers or
existing wireless network in your
home.
Troubleshooting
Solution
– You will not hear any sound from the HDMI output if the
source device is only DVI/HDCP (High-bandwidth Digital
Content Protection)-compatible.
– It is not possible to output SACD or copy-controlled DVD-
Audio sources from the HDMI connection.
– HDMI connection can only be made to HDMI-equipped
devices with HDCP (High Bandwidth Digital Content
Protection.) If you wish to connect to a DVI connector
(equipped with HDCP,) you will need a separate adaptor
(DVI to HDMI.)
– Make sure the resolution of this DVD system matches the
device you have connected using the HDMI. See "DVD
System Menu Options - Video Setup Page".
– You need to switch to another frequency channel to avoid
bandwidth interference by other wireless devices.
– To switch the frequency channel, press and hold the
SOUND key on the remote control for 5 seconds.
– You will see the channel numbers (1- 4) fl ashing on the
display panel of your DVD system.
(continued)
53