Connecting To A Progressive Scan Tv; Connecting To A Hdmi Compatible Device - Philips HTS9800W/37B User Manual

Example of TV's back panel
OUT IN
VIDEO
AUDIO
B
TO SUB-
WOOFER
DIGITAL IN L AUX IN R
Connecting to a Progressive
Scan TV
IMPORTANT!
– The progressive scan video quality
is only possible when a progressive
scan TV is connected to the Y Pb Pr
jacks.
– DO NOT connect both the HDMI
and Y Pb Pr to a TV, it may affect
the picture quality.
A
Use the component video cables (red/
blue/green - not supplied) to connect the
Junction Box's Y Pb Pr jacks to the
corresponding component video input
jacks (or labeled as Y Pb/Cb Pr/Cr or
YUV) on the TV.
Do not connect the video jack from the
Junction Box to your TV.
B
To listen to the TV channels through this
DVD system, use an audio cable (white/
red - not supplied) to connect the AUX
IN jacks to the corresponding AUDIO
OUT jacks on the TV.
C
Proceed to pages 25~26 for detailed
Progressive Scan set up.
Optional Connections
TV
A
Pr Pb Y
COMPONENT VIDEO
Example of
HDMI TV's
back panel
OUT IN
HDMI IN
VIDEO
AUDIO
B
Connecting to a HDMI
compatible device
HDMI connects uncompressed and
unprocessed digital transmission for the
highest and best defi ned sound/image
quality. Its plug and play capability
requires only one cable for both audio/
video output.
A
Open the DVD system's back cover by
releasing the two catches located at the
base of the system.
B
Use a HDMI cable (not supplied) to
connect the HDMI OUT jack (on the
back of the DVD system) to the HDMI
IN jack on a HDMI compatible device
(eg.; HDMI TV, HDCP compliant TV.)
C
Once you have completed the necessary
connections, installation and set-up, see
pages 39 and 42 for optimum HDMI
audio and video settings
Helpful Hints:
– HDMI is backward compatible with some
DVI devices using an appropriate adaptor
plug.
– Most of the older DVI-enabled devices are
not HDCP compliant and playback is not
possible.
(continued)
TV
HDMI OUT
jack located
beneath the
cover of the
DVD system
19