Self-Diagnostic Function - Yamaha NS-BP300 Service Manual

■ SELF-DIAGNOSTIC FUNCTION

There are 10 main menu items, each of which has sub-menu items.
Listed in the table below are main menu items and sub-menu items.
MAIN MENU
1 VER/DEST/SUM
2 DISPLAY CHECK
3 FACTORY PRESET
4 AD DATA CHECK
5 PROTECTION HISTORY
6 EEPROM CHECK
7 iPod CHECK
8 AUDIO CHECK
9 POWER OFF FACTOR HISTORY
A SYSTEM CONNECTOR CHECK
SUB-MENU
1 FIRMWARE VERSION / DESTINATION
2 CHECKSUM
3 DAB MODULE VERSION (A, B models)
1 MENU DISPLAY
2 VFD DISPLAY OFF
3 VFD DISPLAY ALL
4 VFD DIMMER 1 (100 %) / 2 (50 %) / 3 (25 %)
0 PRESET INH / RSRV
1 PS1 PROTECTION
2 PS2 PROTECTION
3 DC PROTECTION
4 THM PROTECTION
5 VOL (VOLUME)
6 BAS (TONE CONTROL: BASS)
7 TBL (TONE CONTROL: TREBLE)
8 BAL (BALANCE L/R)
9 CNT (CENTER)
A KEY
B DST (DESTINATION)
0 DISPLAY / RESET
1 HISTORY 1
2 HISTORY 2
3 HISTORY 3
4 HISTORY 4
1 EEPROM CHECK
1 iPod CONNECTOR CHECK
2 iPod ACCESSORY POWER (DET_IPAP)
3 iPod DETECTION (N_DET_IP)
4 iPod PLAY/PAUSE KEY CHECK
1 AUDIO MUTE ON
2 SP RELAY OFF
3 HP MUTE ON
4 BASS MAX (100Hz +10dB)
5 BASS MIN (100Hz -10dB)
6 TRE MAX (10kHz +10dB)
7 TRE MIN (10kHz -10dB)
1 LAST
2 HISTORY 1
3 HISTORY 2
4 HISTORY 3
5 HISTORY 4
1 SYSTEM CONNECTOR LOOP BACK CHECK
2 SYSTEM CONNECTOR POWER LOW / HIGH (for CD-640)
R-840/NS-BP300
25