Attaching A Stabilizer (L-Shaped) - Fujitsu 2737 User Manual

4.10

Attaching a Stabilizer (L-shaped)

The procedure for attaching the stabilizer is shown below.
■ Confirm the components, and prepare the necessary tools.
Confirm that all components have been delivered (see the table below).
・ Stabilizer (slim/L-shaped) Type name: 19R-26FS1
・ Stabilizer (standard/L-shaped) Type name: 19R-27FS1
Also, prepare the necessary tools:
・ Spanner: For M10 bolts
The procedure for attaching the stabilizer (L-shaped) is shown below.
4.10.1 Attaching the stabilizer (L-shaped)
1
From the front, secure the stabilizer body to the rack with four bolts.
180
Product name
YStabilizer body
M10 bolt
Illustration of attached L-shaped stabilizer
Quantity
1
4