Philips DVP5992/F7E User Manual page 40

Setup Menu Options
Audio Setup Page
Digital Audio Setup
HDMI Audio
Sound Mode
40
(continued)
(underlined options are the factory default settings)
Continued...
{ LPCM Output } –
Notes:
– Digital Audio Setup is only available if HDMI Audio is set to
{ Off }.
– LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound
quality.
This setting is only required if you are using the HDMI OUT jack
to connect your TV or other display device.
{ On }
{ Off }
Select the type of preset digital sound effect that can match the
disc's content or optimize the sound of the musical style you are
playing.
{ 3D }
{ Movie Mode }
{ Music Mode }
{ 48 K }
Select this to play disc recorded at
sampling rate of 48 kHz.
{ 96 K }
Enable 96 kHz output on digital audio if
the amplifier/receiver is compatible
with high sampling rate audio (88.2 / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to '48 K'.
– Enable audio output through HDMI
connection.
– Disable HDMI audio output. In this
case, an alternative audio connection is
required from this unit to your TV.
– It provides a virtual surround sound
experience through the left and right
audio channels. Available options are:
{ Off }, { Living Room }, { Hall },
{ Arena } and { Church }.
– Movie sound effects. Available options
are: { Off }, { Sci-Fi }, { Action },
{ Drama } and { Concert } effect.
– Musical sound effects. Available options
are: { Off }, { Digital }, { Rock }, { Classic }
and { Jazz }.