Audio Setup Page - Philips DVP5992/F7E User Manual

Audio Setup Page

Analog Output
Digital Audio Setup
Setup Menu Options
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analog
output jack.
{ LT/RT }
{ Stereo }
{ V SURR }
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
{ Digital Output } –
– The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
– The connected device can only output
stereo audio through two speakers.
– For virtual surround sound effects.
{ Off }
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{ All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(2-channel).
(continued)
39