Bosch GWS Professional 18-125 V-LI Original Instructions Manual page 8

OBJ_BUCH-1112-005.book Page 9 Tuesday, December 1, 2015 3:21 PM
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Direction-of-rotation arrow on housing
2 Spindle lock button
3 On/Off switch
Technical Data
Angle Grinder
Article number
Rated voltage
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Weight according to EPTA-Procedure 01/2003
Permitted ambient temperature
– during charging
2
– during operation and during storage
Recommended batteries
Recommended chargers
1 dependent of the battery pack being used
2 Limited performance at temperatures <0 °C
Bosch Power Tools
4 Hex key
5 Battery pack*
6 Battery unlocking button*
7 Auxiliary handle (insulated gripping surface)
8 Grinder spindle
9 Locking screw for protection guard
10 Protection guard for grinding
11 Mounting flange with O-ring
12 Grinding wheel*
13 Clamping nut
14 Quick-clamping nut
15 Carbide grinding head*
16 Protection guard for cutting*
17 Cutting disc*
18 Hand guard*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Button for charge-control indicator*
24 Battery charge-control indicator*
25 Handle (insulated gripping surface)
26 Cutting guide with dust extraction protection guard *
27 Diamond cutting disc*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS 18 V-LI
3 601 J3A 3B1
3 601 J3A 351
3 601 J3A 381
V= 18
-1
min 10000
mm 100
M 10
mm 22
kg 2.1/2.3
°C 0...+45
°C –20...+50
GBA 18V..
AL 18..
GAL 3680
English | 9
*
GWS 18-125 V-LI
3 601 J3A 341
3 601 J3A 382
18
10000
125
M 14
22
1 1
2.1/2.3
0...+45
–20...+50
GBA 18V..
AL 18..
GAL 3680
1 609 92A 1UU | (1.12.15)