Table of Contents
Advertisement
Note
When you record movies using a smartphone as a remote controller, the
monitor of the product becomes darker. Also, you cannot use the viewfinder for
still image/movie recording.
This product shares the connection information for [Smart Remote Embedded]
with a device that has permission to connect. If you want to change the device
that is permitted to connect to the product, reset the connection information by
following these steps. MENU →
resetting the connection information, you must register the smartphone again.
When [Airplane Mode] is set to [On], you cannot connect this product and the
smartphone. Set [Airplane Mode] to [Off].
Depending on future version upgrades, the operational procedures or screen
displays are subject to change without notice.
[228] How to Use
Using [Smart Remote Embedded] with a smartphone
touch connection (NFC One-touch remote)
You can connect this product to an NFC-enabled Android smartphone by touching
them together and then operate the product using the smartphone.
1. Activate the NFC function of the smartphone.
2. Switch this product to shooting mode.
The NFC function is available only when the
the screen.
3. Touch the product to the smartphone.
Using Wi-Fi functions
(Wireless) → [SSID/PW Reset]. After
Controlling this product using a Smartphone
(N mark) is displayed on
Advertisement
Table of Contents
