Acer ExtensaTM 670 User Manual page 21

Power Saving Modes
Caution: If your computer loses power while
!
in 5V Suspend, you will lose all of your
unsaved data.
In 5V Suspend mode, the computer saves the
current computer state into your system
memory then shuts off power to most of the
devices except the system memory. The standby
indicator flashes to indicate the computer is in
5V Suspend mode. When the computer resumes
from 5V Suspend mode, it restores the computer
to the saved state.
Press the 5V Suspend hot key (Fn+F3) or close
the display cover to enter 5V Suspend mode.
The computer also enters 5V Suspend mode if
the
enabled and times out.
To resume normal operation, press any key on
the internal keyboard or press the power switch.
The computer also resumes from 5V suspend if
the
options are enabled in the System Setup and a
modem ring or alarm occurs.
Note: It takes the computer a few seconds to
resume from a 5V Suspend. You may see the
screen blank a few times while the computer
restores all of the system states.
1-12
5V SUSPEND TIMEOUT
RESUME ON MODEM RING
parameter in Setup is
or
RESUME ON ALARM