Taylor-Dunn B0-015-00 Operation, T Roubleshooting And Replacement Parts Manual page 109

12. Inspect the spring bolts and spring hangers for signs of wear or damage. If any wear or damage
is found, then they must be replaced.
Damaged or worn spring bolts or hangers could result in sudden failure
of the suspension causing severe bodily injury or property damage.
13. Install the new spring in reverse order.
14. If the spring hanger bolts do not have a grease fitting, lube the spring bushings before installing
the spring.
15. Tighten the spring hanger bolts securely, but not so tight as to bind the spring.
16. Lower the vehicle.
17. Reconnect the main positive and negative cables at the batteries.
18. Remove the blocks from behind the wheels.
19. Release the parking brake and test drive the vehicle.
Maintenance, Service, and Repair
Suspension Page 5