Connecting To A Stereo System; Stereo System Has Right/Left Audio In Jacks; Connecting To A Digital Av Receiver; Receiver Has A Pcm, Dolby Digital Or Mpeg Decoder - Philips DVP3146K/93 User Manual

Connecting to a stereo
system
STEREO
CENTER REAR L
REAR R
SUBWOOFER
AUDIO OUT
Stereo system has right/ left Audio
In jacks
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B
Use the audio cables (white/red) to
connect FRONT (L/R) AUDIO OUT
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the
stereo system (cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
01-43_dvp3146K_93_eng1.indd 13 01-43_dvp3146K_93_eng1.indd 13
AUDIO
IN
DIGITAL
DIGITAL
FRONT L TV OUT
OUT
FRONT R
COAXIAL
COMPONENT VIDEO OUT
Optional connections
Connecting to a digital AV
receiver
AV Receiver
DIGITAL
CENTER REAR L FRONT L OUT
SUBWOOFER REAR R FRONT R
COAXIAL
AUDIO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
C
Set the DVD player's digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 34
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
DIGITAL
TV OUT
COMPONENT VIDEO OUT
13
2007-02-13 1:50:41 PM 2007-02-13 1:50:41 PM