Replacing The Thermal Cap (Uma) - Acer Aspire V7-582 Service Manual

Replacing the Thermal Cap (UMA)

1. Place the thermal cap on the system.
Figure 3-96. Thermal Cap (UMA) Screws
2. Tighten two (2) captive screws (D)
3. Secure the eDP and DC-in cable along the cable guides (C)
Figure 3-97. Thermal Cap (UMA)
4. Connect the DC-in cable to the mainboard connector (B)
5. Connect the eDP cable to the mainboard connector (A)
Machine Maintenance Procedures
B
A
(Figure 3-96).
D
(Figure 3-96).
(Figure 3-97).
C
(Figure 3-97).
(Figure 3-97).
0
3-79