Table of Contents
Advertisement
Indesit
Company
I:
Capacitor
1.
The capacitor is mounted on a bracket at the rear of
the appliance next to the compressor near to the
terminal block.
2.
Unscrew 1 large nut from underneath the
compressor bracket to release the capacitor.
3.
Cut 2 cable ties from the black plastic sleeve
covering the connector plug.
4.
When refitting, make sure that the plastic sleeve is
fitted covering the plug and socket and secured
tightly with a cable tie round each end to prevent
moisture ingress.
J:
Defrost Heater / Evaporator
1.
Remove the Rear Duct Assembly as in F above.
2.
Unplug the Heater connector from the connector block on the rear wall of the freezer.
3.
If necessary remove the Thermostat and Thermal Fuse as in G above.
Service Manual UK
Plastic
Sleeve
Cable
Ties (2)
Capacitor
17 of 18
English
Hide quick links:
Advertisement
Table of Contents
