Basic Connection - Philips DVDR3600 Quick Start Manual

1 Connect

Basic Connection

Before Connecting
A
Select one of the following basic connections ( or
Television (rear)
From an off-air
antenna wall or
R
cable TV socket
1
OUTPUT EXT 1
VIDEO AUDIO COMPONENT VIDEO AUDIO IN VIDEO IN
CVBS L Y PB L CVBS
TV-OUT ANTENNA-IN
HDMI OUT
S-VIDEO R COAXIAL PR R S-VIDEO
(DIGITAL AUDIO)
Philips Recorder (rear)
OUTPUT
VIDEO AUDIO
CVBS L
S-VIDEO R
A
Option
Use this connection if you are connecting the antenna
cable directly from the antenna wall socket or from a
cable TV socket.
A
Unplug the antenna cable that is connected to your
TV and plug it into the ANTENNA-IN socket
on this recorder.
B
Connect the supplied RF antenna cable from the
TV-OUT socket on the recorder to the
Antenna In socket on the TV.
C
Connect a composite video cable (yellow end) from
the CVBS OUTPUT socket on the recorder to
the video input socket on your TV.
D
Connect an audio cable (red/white ends) from the
AUDIO L/R sockets on the recorder to the audio
input sockets on your TV.
E
Plug in the power cord from the recorder to an AC
power outlet.
Note See the accompanying user manual for other possible connections (e.g. Component Video, S-VIDEO).
DVDR3600_97-75_QSG_En_28981.indd2 2 DVDR3600_97-75_QSG_En_28981.indd2 2
B
) according to the type of connecting devices you have.
Television (rear)
From an off-air
antenna wall
socket
1
IN OUT IN OUT
RF
VIDEO AUDIO S-VIDEO
R L
RF
VIDEO AUDIO
R L
Cable Box (rear)
OUTPUT EXT 1
VIDEO AUDIO COMPONENT VIDEO AUDIO IN VIDEO IN
CVBS L Y PB L CVBS
TV-OUT ANTENNA-IN
HDMI OUT
S-VIDEO R COAXIAL PR R S-VIDEO
(DIGITAL AUDIO)
Philips Recorder (rear)
EXT 1
AUDIO IN VIDEO IN
L CVBS
R
B
Option
Use this connection if your current antenna cable is
connected to a cable box.
A
Keep the existing antenna connection from the cable
box to your TV.
B
Connect the supplied RF antenna cable from the
ANTENNA-IN socket on the recorder to the
RF Out socket on the cable box/ satellite receiver.
C C D
Follow steps to under 'Option A' before you
D
proceed to step below.
D
Connect a composite video cable (yellow end) from
the VIDEO IN-CVBS socket on the recorder to
the video output socket on your cable box/satellite
receiver.
E
Connect an audio cable (red/white ends) from the
AUDIO IN L/R sockets on the recorder to the
audio output sockets on your TV.
F
Plug in the power cord from the recorder to an AC
power outlet.
2 Set up
A Finding the viewing channel
Press 2 on the recorder.
A
B
Switch on the TV and other connected devices (e.g.
Cable box, Satellite receiver). The installation menu is
displayed.
Select a menu
language.
OK Next
C
In case you don't see the recorder's installation menu,
S-VIDEO
press the channel down button on the TV's remote
control repeatedly (or AV, SELECT, ° button) until you
see the menu. This is the correct viewing channel for
the recorder.
B
Start basic setup
Use the recorder's remote control and follow the on-
screen instructions to complete the installation.
Note Press
options. Press right
your selection, press OK.
A Select the menu display language.
Select a menu
language.
OK Next
B Set the date.
Use the numeric keypad 0-9 or
enter the correct date. Press OK to confirm.
C Set the time.
Use the numeric keypad 0-9 or
enter the correct time. Press OK to confirm.
Menu Language
D Automatic channel search begins.
English
Searching channels. Please
wait.
Channels found
Note If you have used Option B in 'Basic
Connection' press OK to skip channel search and
proceed to the next step. No preset channels will be
stored.
E All available TV channels are stored.
keys to toggle through the
to select an item. To confi rm
The first preset channel appears.
Menu Language
English
Please enjoy using your
DVD recorder.
F
Press OK to exit.
The recorder is now ready for use.
keys to
keys to
Auto Search
Stop Search
38%
5
BACK OK
Previous Next
Installation Complete
BACK Previous OK Exit
2008-02-15 1:54:11 PM 2008-02-15 1:54:11 PM