Philips DVDR3400 User Manual page 62

DVD Setup Menu Options
CHANNEL SETUP settings
Modify Channel
Information
Channel
Name
P001/Ch003
Scan mode Frequency
Frequency 585.26MHz
TV System PAL B/G
NICAM On
Audio
DUAL A
Decoder
Off
Skip
No
Fine-tune
OK CANCEL
OK
62
Adjust a stored TV channel to your preference and improve the
reception and the sound quality of that TV channel.
{ NICAM } – NICAM is a digital sound transmission
system. It can transmit either one stereo
channel or two separate mono channels.
{ On }
{ Off }
{ Audio } – For bilingual TV programmes, you can switch
between stereo (original) and additional
audio language.
{ DUAL A } – Original broadcast language.
{ DUAL B } – Additional audio language.
{ Decoder } – If the current TV channel is transmitted by
coded TV signals that can only be viewed
properly with a decoder which is connected
to the EXT2 AUX-I/O scart socket, you need
to activate the connected decoder.
{ On }
{ Off }
{ Skip } – Select this to set the channel to be skipped.
{ No }
{ Yes }
{ Fine-Tune } – Select this to fi ne-tune the TV channel
manually if the reception is poor. Use
keys to adjust the frequency and press OK
to confi rm.
(continued)
– Improve the sound transmission
of the TV channel.
– Select this if the reception is poor
and the sound is distorted.
– Select this to allocate the connected
decoder to this TV channel.
– Turn off the decoder feature.
– The TV channel can be accessed
+ −
using the P
control.
– The TV channel can only be
accessed by pressing the
corresponding number button on
the remote control.
on the remote