Philips DVDR3400 User Manual page 48

Editing/ Finalising Recording
Rename disc
The original disc name is generated
automatically by the recorder. You can
change the disc name by following the
steps below.
A
In disc editing menu, use
select { Rename Disc } and press OK.
The keyboard screen appears.
B
Use keys to highlight a
character on the keyboard and press OK
to select.
The maximum input is up to 20
characters.
You can use the following keys on the
keyboard screen to edit your input:
: to remove the character to
BkSp
the left of the cursor.
: to remove the character to
Delete
the right of the cursor.
: to create a space between
Space
characters.
: to toggle between upper and
Caps
lower case characters.
: to clear the entry fi eld
Clear
completely.
C
To confi rm your entry, select
the keyboard and press OK.
The info panel is now updated.
To cancel the changes, select
the keyboard and press OK.
TIPS: No further recording and editing can be carried out on a full or fi nalised DVD±R.
Press to go back to the previous menu. Press DISC MENU to exit.
48
(continued)
Erase disc (DVD±RW only)
This erases the content of the DVD±RW
including those that was not recorded on
this recorder. Once the existing content
is erased, it can be used for recording
again.
keys to
A
In disc editing menu, use
select { Erase Disc } and press OK.
A warning message will appear.
B
Select
NO
confi rm.
Record new title
This function allows you to start a new
recording at the remaining empty space
in the DVD±RW.
A
In disc editing menu, use
select { Record New Title } and press
OK.
B
Select the source you want to record
from and press REC z to start
recording.
on
OK
Overwrite disc (DVD±RW only)
This function allows you to start a new
recording from the beginning of a
on
EXIT
DVD±RW regardless of the contents of
the disc.
A
In disc editing menu, use
select { Overwrite disc } and press OK.
B
Select the source you want to record
from and press REC z to start
recording.
keys to
in the menu to proceed or
YES
to abort, then press OK to
keys to
keys to