Brake System; Brake Light Switch; Brake Pedal Height Adjustment - Honda CBR125R Owner's Manual

BRAKE SYSTEM

INSPECTION
Firmly apply the brake lever or pedal, and check that
no air has entered the system.
If the lever or pedal feels soft or spongy when oper-
ated, bleed the air from the system.
For brake air bleeding (page 15-6).
Inspect the brake hose and fittings for deterioration,
cracks and signs of leakage.
Tighten any loose fittings.
Replace hoses and fittings as required.

BRAKE PEDAL HEIGHT ADJUSTMENT

Loosen the lock nut and turn the push rod until the
correct pedal height is obtained.
After adjustment, tighten the lock nut securely.

BRAKE LIGHT SWITCH

Adjust the brake light switch so that the brake light
The front brake
comes on just prior to the brake actually being
light switch does
engaged.
not require
If the light fails to come on, adjust the switch so that
adjustment.
the light comes on at the proper time.
Hold the switch body and turn the adjuster. Do not
turn the switch body.
FRONT:
REAR:
PUSH ROD
LOCK NUT
BRAKE LIGHT SWITCH
ADJUSTER
MAINTENANCE
BRAKE HOSE
BRAKE HOSE
3-23