Honda CBR125R Owner's Manual page 236

CLUTCH/GEARSHIFT LINKAGE
CLUTCH DISC
Replace the clutch discs if they show signs of scor-
Replace the clutch
ing or discoloration.
discs and plates as
a set.
Measure the disc thickness of each disc.
SERVICE LIMIT: 2.65 mm (0.104 in)
CLUTCH PLATE
Check the plate for discoloration.
Replace the clutch
Check the clutch plate for warpage on a surface
discs and plates as
plate using a feeler gauge.
a set.
SERVICE LIMIT: 0.20 mm (0.008 in)
Warped clutch plates prevent the clutch from disen-
gaging properly.
CLUTCH OUTER/OUTER GUIDE
Check the slots of the clutch outer for nicks, cuts or
indentations made by the clutch discs.
Check the primary driven gear teeth for wear or
damage.
Measure the clutch outer I.D.
SERVICE LIMIT: 30.54 mm (1.202 in)
Measure the clutch outer guide I.D. and O.D.
SERVICE LIMITS:
I.D.: 17.04 mm (0.671 in)
O.D.: 22.93 mm (0.903 in)
MAINSHAFT
Measure the mainshaft O.D. at the clutch outer
guide.
SERVICE LIMIT: 16.59 mm (0.653 in)
10-12
CLUTCH DISC
CLUTCH OUTER
CLUTCH PLATE
OUTER GUIDE
MAINSHAFT