About The Display - Yaesu FT-891 Operating Manual

(see table below)
Lock Feature Active
( see page 32 )
ø Display examples of the Function key （in the case of Noise Blanker）
: Function "OFF".
: Function "ON".
: Function "ON" and then turn the
assigned feature setting.
Operating Mode Indicators
/
VFO-A
/
Memory Channel Number
/
Programmable Memory Scanning
Operating with the Quick Memory
/
Bank
/
Memory tune
Recalling the emergency contact
/
frequency
Antenna Tuner
Active Tuning Antenna System
Connecting the linear amplifier
The VOX function is in use
The Speech Processor function is
in use
The Monitor function is in use
FT-891 Operating Manual
Operating Mode
(see table below)
Meters
Mode Meter
Function Key Status ø
VFO-B
(see table below)
Operation Frequency
( see page 45 )
Icons
MULTI function knob to change the
Displays transmitter output power
Displays ALC voltage
Displays Standing Wave Ratio
Displays the speech processor
compression level
Displays the drain current of the
final stage FET transistors
ø
The Indication of each meter is not precise but
is a relative value and a rough indication.
Icons
Running split operation
The receiver preamplifier is OFF
The attenuator is in use
The Narrow IF DSP filter is in use
The noise blanker is in use
MAIN DIAL at a higher step rate.

About the Display

VFO-B data
Clarifier operation
Clarifier
( see page 33 )
Meters
23