• Do-Not-Disturb Mode LED—Solid green when the Do-Not-Disturb
Mode button on the front panel is turned on and the unit is operating
normally. Flashes green when the Do-Not-Disturb Mode button is turned
on but the Internet connection has problems. Off when the Do-Not-
Disturb Mode button is turned off.
Mounting the CVR100W
2
You can place your CVR100W on a desktop or mount it on a wall.
Placement Tips
• Ambient Temperature—To prevent the unit from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F
(40°C).
• Air Flow—Be sure that there is adequate air flow around the unit.
• Mechanical Loading—Be sure that the unit is level and stable to avoid
any hazardous conditions.
Place the unit on a flat surface so that it sits on its four rubber feet.
Wall Mounting
The CVR100W can be wall-mounted. The wall-mounting hardware is
user-supplied. The ports on the back panel must face either upward or
downward when mounting the unit to a wall.
Insecure mounting might damage the device or cause injury.
W
ARNING
Cisco is not responsible for damages incurred by insecure
wall-mounting.
Connecting the CVR100W
3
The wireless module of the CVR100W is enabled by default. You
N
OTE
can connect one PC with an Ethernet cable or through a wireless
connection to perform the initial configuration. Use the default SSID
name and pre-shared key that are provided on the label at the bottom of
the unit to connect the PC to your wireless network for the first time.
4
Cisco CVR100W Wireless-N VPN Router Quick Start Guide