Service Menu; How To Display The Service Menu; Service Menu List; Details Of Each Menu - Sony PXW-FS7K Service Manual

2-4.

Service Menu

The unit is provided with the Service menu that is useful for maintenance and adjustment. The menu content is displayed
on the screen.
The Service menu consists of the following menus.
Menu Item
Information
Version 1～3
2-4-1.

How to Display the Service Menu

• Press the [MENU] button to display the setup menu.
• Turn the [SEL/SET] dial to place the cursor at "Hours Meter" of the System menu.
• Press the [MENU] button while pressing the [SEL/SET] dial and the [ASSIGN 1] button simultaneously.
The Service menu is added to the setup menu.
Tip
The Service menu is kept in the setup menu unless the power is turned off, after add the Service menu.
It is able to switch on/off the Service menu display by pressing the [MENU] button.
The Service menu is deleted from the setup menu when the power is turned off.
2-4-2.

Service Menu List

Refer to

"2-4-3. Details of Each Menu"

Menu Item Submenu Item
Factory Reset Reset
Information Serial Number
Imager Temp.
Main Board Temp
Log Dump
Version 1 Package
IC2300 (AVP-25 board)
IC2400 (DPR-365 board)
IC2400 (DPR-365 board)
IC0100 (DPR-365 board)
IC1900 (DPR-365 board)
Version 2 IC1100 (DPR-365 board)
IC0201 (VIF-58 board)
Version 3 IC3102 (AVP-25 board)
IC2803 (DPR-365 board)
IC631 (KY-739 board)
2-4-3. Details of Each Menu
Factory Reset Menu
The Factory Reset menu is used to restore the factory settings (default settings) of the Service menu.
PXW-FS7/PXW-FS7K
Description
Information and status of the unit display
Firmware software and FPGA, etc. display
for details of each items.
Choice
(Default Setting)
Execute/Cancel
(Cancel)
–
–
–
Execute/Cancel
(Cancel)
–
–
–
–
Function
Reset to the factory setting (for Service menu)
Displays the serial number of the unit
Displays the temperature of the image sensor
Displays the internal temperature (around
main board)
Outputs log of this unit
Displays firmware version
Displays each IC version
2-4