Samsung SMX-K40BN Service Manual page 71

5. Auto White Balance adjust (3100K)
The camera should be in "E-E" mode (Video Record).
q
Prepare the gray scale chart of 3100°K.
w
Connect the AV cable to Input port of vector scope and TV.
e
Press the OK button after entering "CAMERA ADJUST".
r
- Press the OK button in "WB3100" menu.
- Press the OK button in "YES" .
Make the camera situated in 40㎲ to the 3100°K gray scale chart and make the intensity of
t
illumination 1500 ~ 2000 Lux.
Check the white point comes to the center of display at the vector scope.
y
Adjustment completed!"displays after finishing 3100K Adjust.
u
6. Auto White Balance adjust (5100K)
The camera should be in "E-E" mode (Video Record).
q
Prepare the gray scale chart of 5100°K.
w
Connect the AV cable to Input port of vector scope and TV.
e
Press the OK button after entering "CAMERA ADJUST".
r
- Press the OK button in "WB5100" menu.
- Press the OK button in "YES".
Make the camera situated in 40㎲ to the 5100°K gray scale chart(3100°K gray scale chart+C16 filter)
t
and make the intensity of illumination 1500 ~ 2000 Lux.
Check the white point comes to the center of display at the vector scope.
y
Adjustment completed!"displays after finishing 5100K Adjust.
u
7. OIS adjust
The camera should be in "E-E" mode (Video Record)
q
Press the OK button after entering "CAMERA ADJUST"
w
- Press the OK button in "OIS"
- Press the OK button in "YES"
The actuator moves left/right and then moves up/down
e
"Adjustment OK" displays after finishing OIS adjust.
r
Samsung Electronics
Alignment and Adjustment
8-5