Diagnostics & Troubleshooting; Collecting Technical Support Data - Cisco UCS E series Troubleshooting Manual

Overview
Diagnostics Troubleshooting
Running Diagnostic Tests
See the "Diagnostic Tests" chapter in the configuration guides for the version of the CIMC that you are using.
The configuration guides are available at:
ucs-e-series-servers/products-installation-and-configuration-guides-list.html
Show Diag Command Displays Unknown Port Adapter Error Message
Symptom—When you enter the show diag command, the server is not recognized and you get the following
error message:
Router> show diag
Unknown (type 1889) Port adapter
Port adapter is disabled
Product (FRU) Number
This problem occurs if you installed an unsupported version of Cisco IOS software. The supported Cisco IOS
software version on E-Series Servers is 15.2(4)M and later versions. For details, see the "Verifying the Router,
E-Series Server, and Cisco IOS Software Version Compatibility" section in the getting started guide for the
version of the CIMC that you are using. The getting started guides are available at:
en/us/support/servers-unified-computing/ucs-e-series-servers/products-installation-guides-list.html

Collecting Technical Support Data

You can use the CIMC GUI or the CIMC CLI to collect technical support data. Perform this task when
requested by the Cisco Technical Assistance Center (TAC). This utility creates a summary report containing
configuration information, logs and diagnostic data that will help TAC in troubleshooting and resolving a
technical issue.
Collecting Technical Support Data Using the CIMC GUI
To collect technical support data, do the following from the CIMC GUI:
Procedure
SUMMARY STEPS
1. In the Navigation pane, click the Admin tab.
2. On the Admin tab, click Utilities.
3. In the Actions area of the Utilities pane, click Export Technical Support Data.
4. In the Export Technical Support Data dialog box, click the Export to a local file or the Export to TFTP
server radio button as appropriate.
5. Click Export.
6. Provide the generated report file to Cisco TAC.
: UCS-E140D-M1/K9
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
http://www.cisco.com/c/en/us/support/servers-unified-computing/
Diagnostics Troubleshooting
http://www.cisco.com/c/
25