Digital Output; Lpcm Output - Philips DVD425 Owner's Manual

Digital Output

Press the 34 keys to highlight DIGITAL
1
OUTPUT.
Enter its submenu by pressing the 2 key.
2
Press the 34 keys to highlight the selected item.
3
ALL: Original digital signal is output.
PCM ONLY: If your receiver is PCM-
compatible, or your receiver can not decode
MPEG-2, Dolby Digital, or DTS audio, choose this
option.
4
Press OK.
Press the 1 key and return to the DIGITAL
5
OUTPUT SETUP menu.
Note: If DIGITAL OUTPUT is set to ALL, all audio
settings except MUTE are invalid.

LPCM Output

If you connect the DVD player to a PCM
compatible receiver via the digital terminals, such
as coaxial etc, you may need to select LPCM
OUTPUT.
Discs are recorded at a certain sampling rate. The
higher the sampling rate, the better the sound
quality.
Press the 34 keys to highlight the LPCM
1
OUTPUT.
Enter its submenu by pressing the 2 key.
2
Move the cursor by pressing the 34 keys to
3
highlight the selected item.
48K: Playback a disc recorded at the sampling
rate of 48kHz.
96K: Playback a disc recorded at the sampling
rate of 96kHz.
4
Press OK.
Press the 1 key to return to the DIGITAL
5
OUTPUT SETUP menu.
Setup Menu
21