To Set The Colour System; Tv With Rf Antenna Input Only - Philips 721VR Owner's Manual

To set the colour system

1
Press SYSTEM MENU.
2
The main menu will appear on the TV screen.
3
Press 1 or 2 to select the SYSTEM and press OK.
4
Press 3 or 4 to select according to the COLOUR
system used.
1 2
AUTO
Pr-12
P SET TIME SYS-
REC
R ACMS
PAL DATE
f + -
OSD OSD MESECAM
ON 16:9 DECO-
AUDIO OFF 4:3 DER OPR
5 Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
1 2
RF I/I
Pr-12
P SET TIME SYS-
REC
ACMS
R RF B/G DATE
f RF D/K + -
OSD OSD
DECO-
ON 16:9
AUDIO DER OPR
OFF 4:3
6
Press SYSTEM MENU to remove the menus from the
TV screen.
VCR
Dr.
TEM
SYS-
NIC TEM
i
VCR
Dr.
TEM
SYS-
NIC TEM
i
Before Operation - VCR part

TV with RF Antenna Input only

Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from the
DVD+VCR through the RF cable.
If you have used a
SCART
tune your TV, simply select the AV channel.
The AV channel is already pre-tuned for optimum video
playback on your TV.
Perform the following steps only if interference appears in
the TV picture after you have moved to a different area or
a new station has started broadcasting in your area, or if
you change the connection from RF connection to AV
connection, or vise versa.
1
Turn on DVD+VCR and TV.
2 Tune your TV until you see the picture below
(refer to your TV owners manual).
If the picture is snowy, move to step 4.
If the picture is clear, move to step 3 and press 1 1 on
the DVD+VCR to finish.
3 Press OK to start the automatic tuning process.
4 Press 1 1 on the remote control to enter the standby
mode (the clock indicator will be dimmed).
5
Press and hold CHANNEL 3 or 4 on the DVD+
VCR for more than 4 secs.
RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.
RF CHANNEL
P
SET
R
6
If the picture is still snowy, press CHANNEL 3 or
4 on the DVD+VCR to set the video channel to a
vacant position between 22 and 68 which is not
occupied by any local station in your area.
Note
The RF channel will not change until step
executed.
7
Press 1 1 to store the new RF video channel into the
DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 5, do not retune your
TV.
lead you will not have to
36
i
7 has been
13