Before Using For The First Time; Operating Instructions - Bella R4 Instruction Manual

Before Using for the First Time

1. Carefully unpack the Bella 12 speed Blender and remove all packaging materials. Check the contents to
ensure that all parts are present, and have been received in good condition.
2. Only handle blending blade by its collar.
Warning: Do not touch blades. Blade attachments are very sharp. Use extreme care when handling.
Failure to do so can result in personal injury.
3. Wash all lids in warm, soapy water. Rinse and dry thoroughly.
4. Clean the jar before first use. Fill the jar one-quarter full with clean, warm water. Following the steps
outlined in the operating instructions, pulse several times using the blending blade. Rinse thoroughly.
5. The motor base may be wiped with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

Operating Instructions

1. Place the motor base on a flat, clean, dry countertop or table.
2. Make sure the unit is unplugged.
3. The 12 speed blender comes with one glass jar and one lid. Place the food to be processed into
the glass jar.
4. To assemble the jug, place the sealing gasket on the inner edge of the blade unit. Put the blade attachment
with the sealing gasket into the blade base. Mount the glass jar into the blade base and turn the blade
base on a counter-clockwise direction until it is fixed.
IMPORTANT: Check to make sure if the glass jar is properly attached to the blade base.
5. Place the assembled glass jar and blade base onto the motor block until it is securely engaged.
IMPORTANT: Check to make sure the jar is properly fixed to the motor block.
6. Insert the measuring cup into the opening of the lid. Twist it clockwise until it is locked.
WARNING: Never operate the Blender when the glass jar is empty.
WARNING: Never over fill the jar. Do not exceed the Max Line.
7. To insert the glass jar make sure the blender is switched Off.
8. Place ingredients in the jar; fix the lid to the glass jar by softly pressing down the lid into position.
9. To process, plug the unit into a 120V plug and press any of the speeds on the speed control base.
Speed Control Chart
7
1
10. Use low speeds (1-6) to blend soft fruits or vegetables with liquids for soups, chopping or mixing foods
11. Use high speeds (7-12) to process harder fruits and vegetables for blending, liquefying or grinding food.
12. To crush ice, use the Pulse button.
13. To activate the low and high speeds, make sure the button is:
• Raised for high speeds
• Pressed down for low speeds.
14. Pull up the glass jar from the motor base.
8 9
2 3
10 11
High Speed
4 5
Low Speed
6
12
6