Advertisement
5
Install software
Note:
If your computer does not have a CD/DVD drive or you are
using a Mac, an Internet connection is required to obtain the product
software.
1
Make sure the product is NOT CONNECTED to your
computer.
Windows
:
If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable.
2
Insert the product CD or go to your product's support
page to download and run your product's software
package:
www.epson.com.jm/support/xp441
3
Follow the instructions on the screen to run the setup
program.
OS X:
Make sure you install Software Updater to receive
firmware and software updates for your product.
4
When you see the Select Your Connection screen, select
one of the following, then continue with the on-screen
instructions:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have the USB cable.
Note:
If you see a message on the product's control panel reminding
you to set up an Epson Connect
reminders. You can set up an account later from your computer or
mobile device. See the "Mobile printing" section for more information.
Mobile printing
To print from a mobile device, your product must be set up for
wireless printing or Wi-Fi Direct
for instructions.
Epson Connect Solutions
Epson Connect offers a variety of remote printing options for
your product. Connect wirelessly from your tablet, smartphone,
or computer. Print documents and photos from across the
room or around the world.
www.epson.com.jm/connect
Epson iPrint
for iOS/Android
™
Download the Epson iPrint app from the App Store or Google
Play
to print documents and photos from your iOS or Android
™
device on any email-enabled Epson printer.
account, select No to turn off the
™
. See the online User's Guide
®
™
Control panel
Turns the printer on or off.
Displays the home screen.
Press , , ,
button to enter the selected menu.
Cancels/returns to the previous menu.
Sets the number of copies and prints.
Starts the operation you selected.
Stops the ongoing operation or initializes the
current settings.
Icons showing the network status are displayed
at the top-right of the LCD screen.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• The printer can only connect to a network that supports
2.4 GHz. If your router offers both 2.4 GHz and 5 GHz
connections, make sure 2.4 GHz is enabled.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
to select menus. Press the OK
Advertisement
