3-20 HOW TO REMOVE AND REINSTALL THE PULLOUT DRAWER
3-20-1 Follow Steps to Remove
Step 1) Open the freezer door.
Step 3) Remove 2 screws one on each side of the guide
rails.
Step 5) First: Remove the gear from the left side first by releasing the tab behind the gear, place a screwdriver between the
gear and the tab and pull up on the gear.
Second: Remove the center rail.
Third: Remove the gear from the right side by following the same steps for the left side.
NOTE: THIS TAB MUST BE PUSHED IN TO RELEASE THE GEAR.
Figure 48
Figure 50
Step 2) Remove the lower basket.
Step 4) Removal of the freezer door is done by lifting clear
of the rail support. Fully extend both rails.
Figure 49
Figure 51
Figure 52