HP EliteBook Folio 1040 G1 Quickspecs page 15

QuickSpecs
Technical Specifications
NETWORKING/COMMUNICATIONS
Intel I218LM Gigabit
Network Connection
System Interface
Controller
Memory
Data rates supported
IEEE Compliance
Bus architecture
Data transfer mode
Power requirement
Boot ROM support
Network transfer mode Full-duplex
Network transfer rate
Environmental
Management
Alerting
DA - 14804 Worldwide QuickSpecs — Version 3 — 1.24.2014
HP EliteBook Folio 1040 G1 Notebook PC
Integrated on PCA
Intel I218LM GbE platform LAN connect networking controller
24 KB FIFO packet buffer memory
10/100/1000 Mbps
802.1P
802.1Q
802.2
802.3
802.3ab
802.3az
802.3u
PCI Express and SMBus
PCIe-based interface for active state operation (S0 state) and SMBus
for host and management traffic (Sx low power state)
Requires 3.3V and 0.9V or just 3.3V with integrated regulators
Power consumption 0.733 Watts
Yes
Half-duplex (not supported for the 1000BASE-T transceiver)
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Operating Temperature: 0° to 85° C
Operating Humidity:
WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced
cable diagnostic.
ASF 2.0 support; iAMT 9.0 support
60% RH
Page 15