Samsung DVD-HD850/XAA Service Manual page 32

Disassembly and Reaasembly
4-2-4 Ass'y Housing Removal
1) Remove the 2 Soldering Œ. (TM+, TM-)
2) Push the 2 Hooks ´ in the direction of arrow "A" and remove Ass'y PCB Deck ˇ.
3) Push the Slider Housing ¨ in the direction arrow "B".
4) Push the 1 Hook ˆ in the direction of arrow "C" and lift up the Slider Housing ¨.
5) Remove the Belt Pulley Ø and 2 Screws ∏, Ass'y Motor Load ".
6) Push the 1 Hook ' in the direction of arrow "D" and lift up the Gear Pulley ˝, Gear Tray Ô.
Ø BELT PULLEY
Ô GEAR TRAY
˝ GEAR PULLEY
' 1 HOOK
´ 2 HOOKS
"A"
Π2 SOLDERING
4-8
¨ SLIDER HOUSING
"D"
"A"
Fig. 4-8 Ass'y Housing Removal
"B"
∏ 2 SCREWS
" ASS'Y MOTOR LOAD
ˇ ASS'Y PCB DECK
"C"
ˆ 1 HOOK
Samsung Electronics