How To Insert/Replace The Temperature; Technical Specifications - Chicco comfort quick User Manual

na- perature: -20°C~ 50°C (-4°F~122°F)
to
the HOW TO INSERT/REPLACE THE
ast BATTERY
The appliance comes with a lithium
battery (CR2032x1pc).
Fig. 10
era-
the
ore
one
ath 1. Insert a small pointed object in the
the hole on the back of the thermom-
ast eter whilst applying pressure on the
ing battery seat which will then slide
m- out easily (see diagram10a).
2. When using the appliance for the
ad- first time, remember to remove the
battery safety tab.
3. To replace a spent battery, hold
ctly the thermometer firmly and insert
m- a screwdriver under the battery to
ust remove it (see diagram 10b)
4. Insert the new battery under the
s of metal hook on the left hand side
(number 1), as seen in diagram 10c
her- and press the battery downwards
the (number 2) until you hear it click
ara- into place. Important: insert the
ACE battery with the positive pole (+)
facing upwards.
obe 5. Replace the battery cover.
the
dif- Warning: replace with a CR 2032
res: battery only.
or Never use other types of batteries to
use prevent fire and explosion risks.
Warning: the battery can explode
ery if not handled with care. Do not re-
ion charge, pull apart, overheat or set the
site battery on fire.
is reach of children. To dispose of
the the thermometer, please follow
d at the instructions provided by
m- EC Directive 2002/96/EC (see
a b
Keep the battery out of
page 20); to dispose of the bat-
tery, please follow the instruc-
tions provided by EC Directive
2006/66/EC (see page 20).

TECHNICAL SPECIFICATIONS

1. Complies with EN 60601-1 and EN
60601-1-2 Standard requirements.
2. Complies
Standard requirements for Clinical
Thermometers – Section 5: IR ear
c thermometer performances (with
maximum appliance)
3. Temperature
34~42.2°C (93.2~108°F)
4. Accuracy level: +/-0.2°C(0.4°F) be-
tween 35.5°C (95.9°F) and 42.0°C
(107.6°F) and +/-0.3°C(0.5°F) be-
yond this range
5. Operating range: 10~40°C (50 °F
~104 °F); relative humidity ≤ 85%
6. Transport conditions: -20~65°C
(-4 °F ~104 °F); relative humidity
≤ 95%
Classified
International Standards :
1. Internally powered appliance.
2. Applied part: BF type.
3. Continuous operation mode
CE 0197: conforms to the
93/42/EEC + 2007/47/EC Medical
Equipment Standard.
Note:
1. The thermometer was produced in
compliance with all standards cur-
rently in force and meets all mag-
netic compatibility protection re-
quirements.However, it is necessary
to take certain EMC precautions
and prepare and use the thermom-
eter following the EMC instructions
provided in this document.
2. Portable and mobile radio commu-
nication devices can affect the cor-
rect functioning of electro-medical
17
with EN 12470-5
reading range:
to EN 60601-1