Table of Contents
Advertisement
1. Introduction
E. Notice of Radiated Emissions
This model complies with rules regarding radiation and radio frequency emission as defined by local
regulatory agencies. In accordance with these agencies, you may be required to provide information
such as the following to the end user.
F. Pictures
The pictures in this manual are for illustrative purposes only; your actual hardware may look slightly
different.
G. Interference and Attenuation
Phone may interfere with sensitive laboratory equipment, medical equipment, etc.Interference from
unsuppressed engines or electric motors may cause problems.
H. Electrostatic Sensitive Devices
Boards, which contain Electrostatic Sensitive Device (ESD), are indicated by the
Following information is ESD handling:
• UService personnel should ground themselves by using a wrist strap when exchange system boards.
• UWhen repairs are made to a system board, they should spread the floor with anti-static mat which is
also grounded.
• UUse a suitable, grounded soldering iron.
• UKeep sensitive parts in these protective packages until these are used.
• UWhen returning system boards or parts like EEPROM to the factory, use the protective package as
described.
ATTENTION
- 6 -
sign.
Advertisement
Table of Contents
