Replacement Of Door Assembly - Samsung GE89M-S Service Manual

3. Disassembly and Reassembly

3-3 Replacement of Door Assembly

Parts
Removal of
Door Cap
Removal
of Door "C"
and Door
Assembly
Removal
of Door
Assembly
Removal of
Door "E"
Removal of
Key Door &
Spring
Disassembly Photo
Door Cap
1
Explaination
Insert flat screwdriver into the gap
between Door "A" and Door Cap to
remove Door Cap .
Insert flat screwdriver into gap between
Door "A" and Door "C" to remove Door "C"
because it is fragile . Then remove door
assembly .
Lift up the Door Assembly from Cavity .
Following the procedure as shown in the
figure, insert and bend a thin metal plate
between Door "E" and Door "A" until you
hear the 'tick' sound .
• Insertion depth of the thin metal plate
should be 0 .5mm or less .
Remove pin hinge from Door "E"
Detach spring from Door "E" and key door .