I/O P.c.b; Vtr Mechanism Unit - Panasonic DMR-E75VP Service Manual

13.8. I/O P.C.B.

At first, disconnect one connector on one side of I/O P.C.B, and
pull out the I/O P.C.B.

13.9. VTR Mechanism Unit

1. Disconnect 3 Connectors (P1531, P2501 and P4002).
2. Remove 3 Black Screws (A), Screw (B) , Screw (C) and
Screw D).
3. Lift up VTR Mechanism Unit perpendicularly so to
disconnect Connectors (P2571 and P3001).
Note:
When you lift up VTR Mechanism Unit, because
connections of P2501 and P3001 are tight, pay attention to
that.
13.9.1. Caution for attaching VTR
Mechanism Unit
1. Because Position SW should be set to "Eject Position",
refer to fig.(A) and set the position switch so that the boss
and arrow mark come on a straight line.
2. Attach VTR Mechanism Unit so that Boss of Position SW is
put into long hole of Main Cam Gear, refer to Fig. (B).
39
DMR-E75VP