Test Mode - Yamaha CDX-E200 Service Manual

CDX-E200
Test mode function List of Remote Controller keys
System Control KEY
Code
80
a
81 w/d
83 r y
84
t e
RANDOM
88
89 TEXT/TIME
8A PROG
8B REP
8C TAPE
90 0
91 1
92 2
93 3
94 4
95 5
96 6
97 7
98 8
99 9
9A +10
Note : Check FL display
Each time the key pressed, the display changes as follows (q^w^................^o)
q Illuminate all indicators in this part.
e ~ u Each dot matrix changes as follows.
e r
9
All stop. (Focus, spindle, traverse, laser, tray, etc.)
PLAY (FOON, TRON, TVON(FEON), SPON)
Move traverse forward.
Move traverse reverse till the inner SW turn on.
SPON (Spindle servo on.)
Check FL display.
Accelerate spindle.
FOON, TROF (Enter focus search if focus servo is off.)
Spindle free (servo off)
Forward 150 tracks kick continuously.
Returns to product mode.
Auto adjustment mode 1 (TR-off set, FO-off set, FO-rough gain adjustment)
Auto adjustment mode 2 (TR-balance, TR-rough gain adjustment)
Auto adjustment mode 3 (FO-fine gain, TR-fine gain, FO-balance adjustment)
Reverse 1 track kick continuously.
Forward 1 track kick continuously.
Reverse 30 tracks kick continuously. (Coefficient set up mode : upper digit down)
Forward 30 tracks kick continuously. (Coefficient set up mode : upper digit up)
Reverse 150 tracks kick continuously.(Coefficient set up mode : lower digit down)
Change the coefficient mode.
(^Conefficient set up mode^Return to product mode with set up coefficient)
w Illuminate all indicators in this part.
t y u
FUNCTION
(Coefficient set up mode : lower digit up)
(Coefficient set up mode : address down)
(Coefficient set up mode : address up)
i Dot matrix illuminates like this.
o All indicators go out.