Test Mode - Yamaha TSX-100 Service Manual

TSX-100
I TEST MODE
The firmware version is displayed.
G Starting Service Mode
a. Connect the power cable of this unit to the AC power outlet.
b. Press the "INPUT/SNOOZE" key of this unit to turn on the power.
c. Press the "INPUT/SNOOZE" key of this unit repeatedly to select the CD.
Make sure that [No Disc] is displayed.
* While the disc is being played, press the "
d. While pressing the "MUTE" key of this unit, press the "
The SERVICE mode is activated and each firmware version is displayed at about 5 seconds intervals.
SERVICE SERVICE MODE SERVICE SERVICE SERVICE MODE MODE MODE MODE
HOST HOST VER VER
HOST HOST HOST VER VER VER
071018-03U/U 071018-03U/U 071018-03U/U 071018-03U/U 071018-03U/U
Destination
About 5 seconds
DSP DSP VER VER
DSP DSP VER DSP VER VER
07 07 07 07 10 07 10 10 10 16 10 16 01 16 16 16 01 01 01 01
About 5 seconds
USB USB VER USB VER VER VER
USB USB VER
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
About 5 seconds
DAB DAB VER DAB VER VER VER
DAB DAB VER
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx xx xx xx xx
About 5 seconds
3:53PM 3:53PM 3:53PM 3:53PM 3:53PM
No No Disc Disc
No Disc No No Disc Disc
e. Press the "POWER OFF" key of this unit to turn off the power.
f. Disconnect the power cable of this unit from the AC power outlet.
G Starting Factory Reset
All settings are returned to initial settings.
a. Activate the Service Mode.
b. While the firmware versions are displayed, press and hold the "INPUT/SNOOZE" key for longer than 4 seconds.
c. [FACTORY SET] is displayed and the power is turned off automatically in about 4 seconds.
16
A A A A A / F F F F F
This is displayed when the SERVICE mode is activated.
The firmware version of the main microprocessor is displayed.
The firmware version of DSP is displayed.
The firmware version of USB is displayed.
(R, B, G models)
The firmware version of DAB is displayed.
(B model)
Ordinary display.
(STOP/EJECT)" key to eject the disc.
A A A A A / F F F F F (STOP/EJECT)" key of this unit.