Introduction; Intended Use; Scope Of Delivery; Parts Description - Kompernass ULGD 3.8 A1 Operation Manual

Hide thumbs Also See for ULGD 3.8 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
CAR BATTERY CHARGER
ULGD 3.8 A1

Introduction

We congratulate you on the purchase of
your new device. You have chosen a high
quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
GB
information and instructions for use. Only use the
MT
unit as described and for the specifi ed applica-
tions. If you pass the product on to anyone else,
please ensure that you also pass on all the
documentation with it.

Intended use

The Ultimate Speed ULGD 3.8 A1 is a multi-stage
car battery charger that is suitable for charging
and trickle charging up of 6 V or 12 V lead-acid
batteries (batteries) with electrolyte solution (WET),
electrolyte absorbent mats (AGM) or gel electrolyte
(GEL).
This appliance is not suitable for charging lithium-ion
batteries. The is not intended for commercial use
and is for indoor use only.
The manufacturer accepts no responsibility for
damage(s) arising out of usage contrary to the
instructions specifi ed below.

Scope of delivery

1 Car battery charger ULGD 3.8 A1
2 Clamps (1 red, 1 black)
1 Instructions for use

Parts description

See Figure A:
12 V / 0.8 A (Program 2)
12 V / 3.8 A (Program 3)
12 V / 3.8 A (Program 4)
6 V / 0.8 A (Program 1)
LED reverse connection
LED stand-by
Charge display
26
Condition display
Voltage display
Program selection button (MODE)
See Figure B:
Charger
Fastening eyelets
Mains lead
Positive pole clamp (red)
Negative pole clamp (black)
Positive pole connector cable (red) inc. lug
Negative pole connector cable (black) inc. lug

Technical Data

Input voltage:
Power consumption:
Output voltage:
Output power:
Fuse (internal):
Environmental
temperature:
Protection rating:
Protection class:
Battery types:

Safety

Safety instructions

This charger is suitable for indoor use only.
This appliance may be used by children aged
8 over and by persons with reduced physical,
sensory or mental capabilities or lack of experi-
ence and knowledge, provided that they are
under supervision or have been told how to use
the appliance safely and are aware of the poten-
tial risks. Children must not use the appliance as
a plaything. Cleaning and user maintenance
tasks may not be carried out by children unless
they are supervised.
220 - 240 V ∼ 50/60 Hz
60 W
6 V
/ 12 V
0.8 A / 3.8 A
T2A
2 A
0°C bis 40°C
IP 65
II /
6 V lead acid battery
1.2 Ah - 14 Ah
12 V Lead acid battery
1.2 Ah - 120 Ah
ULGD 3.8 A1

Advertisement

Table of Contents
loading

Table of Contents