Alpine CDA-9830R Service Manual page 36

No. Symbol
74 CD FOUT
75 REG RESET
76 RDS RESET
77 T-MUTE
78 RDS FOUT
79 RDS STBY
80 NC
81 DOOR LED
82 LIMIT SW1
83 LIMIT SW2
84 MOTOR ON
85 MOTOR FOR
86 MOTOR REV
87 HI-TEMP
88 CD IN SW
89 AUDIO
90 NC(PULL-DOWN)
91 AFC
92
NC
93
94 GND
95 NOSE DET
96
VCC
97
98
NC
I
100
I/O
O Frame output terminal.
O RESET signal output terminal to system Regulator IC.
O RESET control signal output terminal to RDS u-COM.
I A-MUTE signal input terminal from RDS u-COM.
O DATA output signal output terminal to RDS u-COM.
O Stand-by signal output terminal to RDS u-COM.
- No connect terminal.
O ESC LED lighting control output terminal.
I OPEN LIMIT SW signal input terminal. (H:SW OFF, L:SW ON)
I CLOSE LIMIT SW signal input terminal. (H:SW OFF, L:SW ON)
O Power supply control terminal for unizon MOTOR.
O Unizon MOTOR forward driving signal output terminal.
O Unizon MOTOR backward driving signal output terminal.
I CD HI-TEMP input terminal.
I CD DISC-IN detection signal input terminal.
I A/D DATA input terminal from AUDIO signal.
- Pull-down connect terminal.
I AFC signal input terminal.
- No connect terminal.
- GND terminal of A/D Converter.
I NOSE detachable detection terminal.
I Standard voltage input terminal of A/D Converter.
I Power supply input terminal of A/D Converter.
- No connect terminal.
- 42 -
Terminal Description
TO SCHEMATIC
CDA-9830R
TO CONTENTS