Setting Alerts; To Set An Alert - Emerson 0037-7303A Installation And Operation Manual

4.3. Setting Alerts

Menu > Settings > Alerts
The Commercial Communicating Programmable Thermostat is designed to alert you to important informa-
tion about your energy use. You can set the unit to notify you - with an auditory beep or with a pop-up message
- when a new load control or pricing event takes place, or when it's time to perform routine maintenance such
as changing the filter on your HVAC unit. To enable alerts, perform the following steps:

4.3.1. To Set an Alert

Step 1: From the ALERTS screen, you can choose to be alerted
when it's time to perform routine HVAC maintenance. You
can also choose the manner in which you'd like to be alerted:
• By having the unit "beep"
• Via pop-up message on the thermostat display
Use the
MAINTENANCE. Press
Step 2: From this screen, you can choose to be reminded to change
the air filter, humidifier pad and UV lights on your HVAC
unit. Using the
press
To activate the selected reminder, press ENTER.
Step 3:
Use the
press
Step 4:
Use the
from today that you'd like to be reminded to perform the
routine maintenance. Press
MAINTENANCE menu.
Step 5: Repeat steps 2-4 for any other equipment maintenance
reminders of interest. Press
menu.
Table 4-9 - Setting an Alert
Setting Alerts
and arrows to select HVAC
.
and arrows, select a reminder and
to turn the reminder ON.
and arrows to select REMIND ME IN, then
.
and arrows to select the number of months
to return to the HVAC
to return to the ALERTS
Alerts
HVAC Maintenance
Beep On Alert / Message
Active Alerts
Home
Maintenance Reminders
Air Filter
Humidifier Pad
UV Lights
Air Filter Reminder
Status
Remind Me In
Air Filter
Remind me to replace this in:
3
Months
Customizing Thermostat Settings • 15
Off
Off
Off
On
3 mo